UV-resistant Jumbo Bags , isto é, sacos contêineres resistentes a UV, usados ​​para armazenamento de produtos químicos e embalagens de transporte, os sacos contêineres são um dos usos dos sacos contêineres químicos. É projetado pelas características das próprias matérias-primas químicas, materiais de embalagem, além de transporte e outros requisitos, geralmente também para garantir a integridade de seus itens de embalagem, segurança, bem como em linha com as disposições dos materiais de embalagem nacionais correspondentes. Toneladas de sacos, também conhecidos como sacos de contêineres flexíveis, toneladas de sacos, sacos espaciais, etc., toneladas de sacos personalizados, toneladas de sacos de contêineres, tradução para o inglês de uma variedade, FIBC, é um tipo de aparelho de unidade de contêiner.

Toneladas de fabricantes de sacolas na produção precisam estar atentos a muitos assuntos, antes de mais nada considerar o ponto de vista do consumidor, a seguir apresentaremos em detalhes.

A segurança de toneladas de sacos é a primeira coisa a considerar. No projeto, considere o volume da embalagem, o peso da carga e o número de unidades de embalagem, mas também considere a distância do transporte e quantas vezes de manuseio, quais meios de transporte e métodos de transporte. deve levar totalmente em consideração.Tais como pó ou substâncias tóxicas, com medo de itens contaminados nos requisitos de desempenho de vedação são muito rigorosos, materiais propensos a umidade ou mofo na estanqueidade ao ar também têm requisitos especiais.

Os sacos de tonelada são utilizados principalmente em itens a granel, granulados ou em pó, a densidade física e o grau de afrouxamento do conteúdo do uso de diferentes efeitos.

O desempenho do saco de tonelada deve ser o mais próximo possível do cliente para carregar o produto para fazer o teste, que é o padrão escrito no “Teste de enchimento padrão especial”, na medida do possível para cumprir os padrões técnicos para atender aos desafios da economia de mercado.

Que papel pode UV-resistant Jumbo Bags jogar?

1, as restrições de embalagem dos fabricantes de sacos contêineres são muito grandes. Produtos em pó e granulados podem ser embalados em sacos contêineres.

2, melhora a potência de carga e descarga. Possui grande capacidade, carga e descarga são muito rápidas, mais de dez vezes mais eficientes do que a linha de embalagem de saco de papel convencional.

3, pode efetivamente manter o produto. Os dados do saco de contêiner são à prova de chuva, função impermeável, depois de preencher o exterior também pode ser à prova de umidade.

4, ocupam menos espaço. Os sacos vazios podem ser dobrados, tamanho pequeno, toneladas redondas de sacos, toneladas de sacos, capacidade total do saco.

5, longa vida, UV-resistant Jumbo Bags toneladas de sacos, podem ser usadas repetidamente. Sacos de toneladas são feitos de dados de alta resistência, duráveis ​​e podem ser aceitos e reutilizados.

Tagged

Casa na compra de mercadorias terá uma sacola de compras especial, e as mercadorias serão embaladas com uma sacola especial, então o material granular em pó a granel precisa usar que tipo de sacola para embalá-la? Desta vez temos que mencionar a bolsa jumbo. jumbo bag pertence a um contêiner de embalagem de transporte flexível, use-o como pó, embalagem de materiais a granel e granulados é perfeito! Usar saco jumbo para embalar esses materiais pode efetivamente melhorar a eficiência de carga e descarga, mas também pode reduzir o custo de transporte, que é a principal razão pela qual muitas empresas escolhem o saco jumbo! jumbo bag factory para contar a todos!

Elementos a serem considerados ao projetar uma bolsa jumbo:

1.Força: fatores a serem considerados no projeto, o volume da embalagem, o peso do conteúdo e a unidade da embalagem (o número de embalagens) também precisam considerar a distância de transporte e o número de transporte, bem como o modo de transporte e o modo de transporte.Material: a seleção razoável de materiais deve ser baseada nas condições do usuário e na taxa de processamento razoável. Por exemplo, a capacidade dos materiais plásticos de prevenir o envelhecimento ao sol é o principal indicador da qualidade do recipiente. No processo de produção, deve-se atentar para o uso de agentes anti-UV e a escolha de materiais anti-UV.

2.Selagem: diferentes materiais de embalagem, diferentes requisitos de vedação, como pó ou materiais tóxicos, com medo de itens contaminados, os requisitos de desempenho de vedação são muito rigorosos. Ao projetar sacos contêineres, preste atenção ao impacto do processo de revestimento do filme de base e do processo de costura no desempenho da vedação.

3.Disponibilidade: no projeto da sacola-contêiner, é necessário considerar integralmente o levantamento e transporte da sacola-contêiner e o desempenho do material carregado.

4. Usabilidade: também deve ser levado em consideração se os alimentos embalados são alimentos e para garantir que não haja efeitos adversos nos alimentos embalados.

Estes são os quatro elementos que precisam ser considerados ao projetar jumbo bag.Para uma sacola jumbo, compreenda apenas os quatro elementos para projetá-la, a fim de garantir sua qualidade e desempenho, de modo a tornar o design da sacola jumbo melhor aplicado ao empreendimento, mas também para proteger o efeito dos materiais carregados com sacola jumbo!

Tagged

Fibc bags is a kind of bag used for transportation, this kind of product is also known as container bags. It has a certain softness, but the material is strong, is a good helper to transport materials.Mainly used in some materials for the fine powder, particles and other systems of the industry.These material activities are large, transport is able to use it to stop in full bloom, not easy to show leakage.
fibc bags operate bento boxes when loading materials, it is very light weight itself, can complete the automation state, so as not only to save manpower, but also to speed up the progress of work.Loading and unloading time can use the forklift to stop batch loading and unloading, a large amount of handling, fast and effective.Large capacity, more varieties, strong material can stop stacking, can be frugal space, but pay attention to the stacking to be stacked neat, to prevent the placement is not in place of the onset of dumping.

fibc bags are a product that can be applied repeatedly and is easy to carry.Can play a good role in rain and water, can ensure the quality of internal materials, their use of life is also comparable to long so very popular. fibc bags in the operation of the need to pay attention to: if lifting a bag, hanging from the air when the personnel can not stand below, because the product is a bag, there is a certain use of life.

If it falls under gravity, it’s very risky.When lifting should hang adhere to the equilibrium state.Do not hang it on one side or diagonally.During the lifting process, do not let other items come into contact with it to avoid scratching the hook or bag.If you use a forklift to transport the bag, do not directly fork like the bag to avoid damage. fibc bags how to carry it?Usually, the tray should be used to stop.Do not use the fork to hold the upper part of the bag swing stop handling work, it is easy to damage.In addition, whether in a stationary state or moving state should adhere to the upright posture.

Tagged

Of course, the printing quality of the container tons of bags depends on the following elements, personnel issues: personnel issues mainly reflect the employee’s sense of obligation and technical proficiency level. Equipment technology: container tons of bag equipment consumption aging, drying, and bag feeding technology will lead to the container bag consumption process presents a variety of adhesions and other issues. The raw material is good or bad: including ink quality, mixing average, bag quality, or offset printing problems, and other raw material problems will lead to printing problems.

Jumbo bag manufacturers in the consumption of jumbo bag are very careful, they will use the data processing, which will use the spinning process consumption FIBC, but spinning process compared to the trouble, always present in the consumption or more or fewer problems, but the phenomenon of bamboo during surgery, what is the reason? The cooling water temperature is high. The crystallinity of the polypropylene film is too large.

Stretching temperature is low. Oven temperature is low, or uneven temperature spread, which leads to spinning is stretched at inappropriate temperatures. The extrusion temperature is low. The extrusion temperature is low, the film is not plasticized. The stretch ratio is low. The stretch ratio is low, the blank is not stretched enough. Bag manufacturers in the packaging process of consumption in the process of consumption of bamboo yarn have a great impact on the quality of the bag, so the net bag manufacturers will spend a lot of human and material resources. About this.

jumbo bag is a new type of packaging container. Admittedly not presented for a long time, but it carried out quickly. The use of container bags can speed up loading and unloading efficiency. Its large capacity, loading, and unloading speed. Paper bag packaging a lot; transport is also very bento, the jumbo bag has a special ring, bento lifting equipment used. the jumbo bag takes up very good space. After folding can store empty bags, but after the expansion of the empty bag capacity; container bags use long life, can be used repeatedly.

Tagged

Of course, the printing quality of the container tons of bags depends on the following elements, personnel issues: personnel issues mainly reflect the employee’s sense of obligation and technical proficiency level. Equipment technology: container tons of bag equipment consumption aging, drying, and bag feeding technology will lead to the container bag consumption process presents a variety of adhesions and other issues. The raw material is good or bad: including ink quality, mixing average, bag quality, or offset printing problems, and other raw material problems will lead to printing problems.

Jumbo bag manufacturers in the consumption of jumbo bag are very careful, they will use the data processing, which will use the spinning process consumption FIBC, but spinning process compared to the trouble, always present in the consumption or more or fewer problems, but the phenomenon of bamboo during surgery, what is the reason? The cooling water temperature is high. The crystallinity of the polypropylene film is too large.

Stretching temperature is low. Oven temperature is low, or uneven temperature spread, which leads to spinning is stretched at inappropriate temperatures. The extrusion temperature is low. The extrusion temperature is low, the film is not plasticized. The stretch ratio is low. The stretch ratio is low, the blank is not stretched enough. Bag manufacturers in the packaging process of consumption in the process of consumption of bamboo yarn have a great impact on the quality of the bag, so the net bag manufacturers will spend a lot of human and material resources. About this.

jumbo bag is a new type of packaging container. Admittedly not presented for a long time, but it carried out quickly. The use of container bags can speed up loading and unloading efficiency. Its large capacity, loading, and unloading speed. Paper bag packaging a lot; transport is also very bento, the jumbo bag has a special ring, bento lifting equipment used. the jumbo bag takes up very good space. After folding can store empty bags, but after the expansion of the empty bag capacity; container bags use long life, can be used repeatedly.

 

Operator:Abner.Li

Tagged

In different seasons, when using the FIBC bag, you need to pay attention to different matters. So what are the details you must pay attention to when using the FIBC bag?

When the FIBC bag is not used, fold it up as much as possible, reduce moisture and sunlight exposure, and shorten the service life of FIBC bag due to the impact of the external environment. But also pay attention to rain and snow, low freezing temperature, cold weather, will greatly reduce the application effect of the product.

There is also the problem of the secondary application. Before the secondary application is stopped, all the original loaded items should be emptied to prevent the loss caused by the mixing of items. There are also problems with its application environment to reduce its impact on the FIBC bag. The vast majority of FIBC bag‘s consumers have the ability to resist the corrosion of acid, alkali, and other chemicals. Therefore, when using and storing, the request is not too high, and it can also bring a lot of conveniences.

Because of its excellent electrical insulation, its external resistance and volume resistance are very large, the breakdown voltage is large, and the dielectric loss angle tangent value is small. Introduction to FIBC bag’s usual method of self-care:

In the process of using the FIBC bag, we are sure to encounter some problems with how to pack. Today, the manufacturers of ton bags simply introduce the method of FIBC bag’s self-care.

Under the condition of direct sunlight, the strength of the FIBC bag will be reduced to 25 in one week and 40 in two weeks, which can’t be used at all. Therefore, the FIBC bag should be stored in a cool and clean room. During transportation, it should be kept away from the sun and rain. It should not be close to the heat source. The storage period should not exceed 18 months.

In practice, it is possible for FIBC Bag to age in 18 months, so the effective period of FIBC Bag should be shortened and 12 months should be the appropriate period.

Research methods, pay attention to efficiency so that the ability does not delay the normal use of container bags, saving consumption costs.

Tagged

The application environment of the FIBC bag is often exposed to light in the outdoor, and the light amount in each region is different, which may lead to the local foreign businessmen mistaking the UV protection of the container bag for not reaching the request. It is suggested that container bag manufacturers should increase the dosage of anti violet masterbatch properly according to the difference of illumination in different regions, so as to improve the production quality and prolong the service life.

The main processing raw materials and auxiliary materials of FIBC bag factory are generally as follows: under the condition that the price of container bags is almost the same as the labor cost, it depends on whether the materials can be brand-new aggregates, whether the excessive recycled materials can be added, whether the modifier (calcium carbonate masterbatch) can be added, and the aging resistance of PP woven fabric with the modifier will drop seriously.

The price of color masterbatch is also very different. Some pigments can play an anti-aging role in the container bag and have a great impact on the service life of the container bag. Whether the rutile titanium dioxide masterbatch with external coating can be used, whether the yellow pigment with good weather resistance can be used, whether the blue pigment used contains free copper, etc. will have a great impact on the service life of the container bag.

The form and dosage of anti violet can play a great role in the aging of containerized bags. Powdered UV will sink due to the difference in specific gravity and size and PP particles, and it is difficult to disperse evenly into PP pellets. This will lead to some very good flatweaves, some of which are very poor, which will affect the aging resistance of the entire woven fabric. However, the size and specific gravity of UV resistant masterbatch similar to PP will not have such problems.

Tagged

The price of container bags sometimes varies according to the price of materials.

For example, many enterprises use non-woven fabrics to sew container bags. What are the advantages of making jumbo bags from non-woven fabrics? Non-woven fabric (polyester non-woven fabric, non-woven fabric) is also known as geotextile, which is a kind of permeable geosynthetic material and is formed by needling or weaving synthetic fibers. Burning wool non-woven fabric has excellent filtration, isolation, enhanced protection, high tensile strength, good permeability, high-temperature resistance, antifreeze, aging resistance, and corrosion resistance.

  1. Pavement method of non-woven fabrics:

Cold rolling with manual service; Nylon cloth should be leveled and maintain a moderate deformation capacity.

The installation of polyester filament or polyester staple non-woven fabric is generally based on overlapping, sewing and electric welding of steel bars. The total width of sewing and electric welding is generally 0.1μm or more, and the total overlapping width is generally 0.2M or more. Non-woven fabrics that will be exposed for a long time shall be welded or sewn by electric welding.

2, non-woven fabric pavement processing technology:

Storage, transportation, and solution of non-woven fabrics

Burnt nonwoven rolls should be maintained from damage before installation. Non-woven fabric rolls should be piled up in areas without water. The height-to-width ratio of the stacks should not exceed four rolls, and the resolution of wire rope rolls can be seen. Non-woven fabric rolls must be covered with opaque raw materials to avoid UV embrittlement. In the storage process, the consistency of identification and data information should be maintained.

During the whole transportation process, the non-woven fabric roll must be protected from damage (including on-site transportation from raw materials storage to work).

Be sure to repair the non-woven fabric roll damaged by physics. Non-woven fabrics that are seriously damaged cannot be used. All non-woven fabrics that come into contact with leaked chemicals are not allowed to be used in this new project.

  1. Non-woven fabric splicing

All splices must be carried out continuously (for example, point splicing is not allowed). Before overlapping, spunlaced nonwoven must overlap less than 150 mm. Smaller needle gauge selvages (exposed edges of raw materials) shall be at least 25 mm.

The self-hand woven non-woven fabric connector comprises a 1-thread and a thread chain sewing mode. The thread used for sewing should have a strength of over 60N and be equivalent

Composite resin with acid resistance and ultraviolet resistance on or above nonwoven fabric.

Tagged

In order to better serve and guide customers, we send on-site pavement service personnel to Forro a granel seco using the end of the Carbon Black Factory, conduct
Dry bulk liner of white Carbon Black (SiO2) products for bulk transport packaging of loading and unloading cargo guidance services, and track the record of our patented product PE film container bags/bulk bags in low density, very light powder products in the field of use.

Combined with the current loading and unloading requirements of carbon black and the customer’s terminal, we have carried out practical professional design to meet the customer’s use
Requirements.In the process of unloading, we also give key guidance, such as container elevation operation, flow control, airflow system use.
The successful completion of the customer in the Carbon Black Forro a granel seco products to achieve a non-polluting silo to silo closed transport storage mode.

We can provide customers with a complete package of logistics and transportation solutions! Large bulk packaging service for the world!

Tagged

The key reason for the broken edge of bulk bag sling is that the quality of sling is very poor. If it can’t stand too long-term application, it will break or break the edge, resulting in the problem that the overall container bag can’t be used.

Generally speaking, there are three reasons for the broken edge of sling:
A. excessive and frequent application and continuous lifting damage make the sling exceed the service life, and the similar container bags have already exceeded the service life or frequency, so new ones should be purchased.

B. the most important factor for the sling to rot is the poor quality of the sling made by the manufacturer. It can only be used once or twice. The bulk bag sling is rotten, but the overall body is not damaged. If it has the ability to repair, it can be removed and replaced.

C. another key element is that if incorrect materials are used to make a sling, it is the key problem that causes the broken edge of the bulk bag. If too much polypropylene is used and too little high-pressure polyethylene is used, it will cause the weathering layer. Because the container bag is often used outdoors, the broken edge is inevitable. If such a situation occurs, replace the manufacturer as soon as possible.

Tagged

The use of FIBC in our life is very common. We use plastic container bags according to the production of different materials，
It can be divided into two kinds. One is PE material, the other is PP material. To know these two materials have good low-temperature resistance and good chemical stability.
After that made of plastic containers, which of these two materials better performance?

The container bag made of PE is easy to aging and requires careful maintenance; PP is a semi-crystalline material; it is harder than PE and has a higher melting point. When the homopolymer type of PP temperature is higher than 0℃, the plastic container bag is very brittle. Thus, many commercial PP material is a random copolymer having 1-4% ethylene or higher ethylene content ratio.Copolymer.PP type polymer type has low heat distortion temperature, low transparency, low gloss, and low rigidity, but has a stronger impact strength. With the increase of ethylene content, the strength of PP increases. Bulk bags made of PP material are more expensive.

Tagged

In everyday life how do we control the printing of space bags, also called Container bag, ton bag?
The colors of ton bags should match real, natural and colorful. The index should include two aspects; one is the field density tolerance of different sheets of the same product, Cyan (C) magenta (M) less than or equal to 0.15 black (BK) less than 0.20, yellow (Y) less than 0.10 ;
Appearance is the first thing, the layout must be clean, no obvious dirt; secondly, the color should be basically the same; that is the text, it should be complete, clear, accurate; and finally the size requirements. Fine product size tolerance is less than 0.5 mm, the general product size tolerance is less than 1.0 mm.
Of course, the printing quality of the Container bag depends on the following factors
First, personnel issues: personnel issues mainly reflect the sense of responsibility and technical proficiency of employees.
Second, the equipment process: the production of tons of container bags equipment aging, drying and send the bag technology will lead to a variety of problems such as adhesion container bag production process.
Third, the quality of raw materials: including ink quality, mixing uniformity, bag quality or offset printing problems and other raw material issues will lead to printing problems.


Of course, the printing quality of the Container bag depends on the following factors
First, personnel issues: personnel issues mainly reflect the sense of responsibility and technical proficiency of employees.
Second, the equipment process: the production of tons of container bags equipment aging, drying and send the bag technology will lead to a variety of problems such as adhesion container bag production process.
Third, the quality of raw materials: including ink quality, mixing uniformity, bag quality or offset printing problems and other raw material issues will lead to printing problems.

Tagged

Sobre nós

Pacote Co. de Hebei Wanhefeng, Ltd. Somos um fabricante profissional de vários sacos de contêiner, tecido PP, tecido PE, cinto de elevação, cinto de proteção e linha de travamento, etc. Estamos perto da ferrovia Xibaipo, transporte conveniente e rápido. sacos e assim por diante. Nossa empresa cobre uma área de 10 mil metros quadrados e mais de 300 trabalhadores, incluindo 20 pesquisadores. O FIBC pode ser rotatividade de armazém, disponibilidade recuperável, utilização de reutilização, forte capacidade de carga, peso leve, fácil carga e descarga mecânica e facilitar a logística e o transporte.

PRODUTOS

Solicite um orçamento

Contate-nos

  • Pacote Co. de Hebei Wanhefeng, Ltd.
    • +86 155 4456 6565wanhefeng@whfpackage.com
  • Zona Industrial de Hexi, cidade de Weizhou, condado de Jingxing Shijiazhuang, Hebei, China 050300.
    • Zona Industrial de Hexi, cidade de Weizhou, condado de Jingxing Shijiazhuang, Hebei, China 050300.+86 15544566565+86 0311-82359166
    wanhefeng@whfpackage.comnancy@whfpackage.com

    Copyright © 2026 Hebei Wanhefeng Package Co., Ltd. Todos os direitos reservados.  privacy policy

    Contate-nos
    whatsapp

    Solicitar Consulta