UV-resistant Jumbo Bags to znaczy torby pojemnikowe odporne na promieniowanie UV, używane do przechowywania i transportu produktów chemicznych, torby pojemnikowe są jednym z zastosowań toreb pojemnikowych na chemikalia. Został zaprojektowany na podstawie charakterystyki samych surowców chemicznych, materiałów opakowaniowych, oprócz wymagań związanych z przenoszeniem i innymi wymaganiami, ogólnie także w celu zapewnienia integralności elementów opakowania, bezpieczeństwa, a także zgodnie z przepisami odpowiednich krajowych materiałów opakowaniowych. Tony toreb, znane również jako elastyczne torby pojemnikowe, tony toreb, torby kosmiczne itp., niestandardowe tony ton toreb torby kontenerowe, angielskie tłumaczenie odmiany, FIBC, to rodzaj urządzeń kontenerowych.

Mnóstwo producentów toreb przy produkcji trzeba zwrócić uwagę na wiele spraw, przede wszystkim stanąć z punktu widzenia konsumenta do rozważenia, poniżej przedstawimy szczegółowo.

Pierwszą rzeczą do rozważenia jest bezpieczeństwo ton worków. Przy projektowaniu należy wziąć pod uwagę objętość opakowania, wagę ładunku i liczbę jednostek opakowaniowych, ale także wziąć pod uwagę odległość transportu i liczbę przeładunków, jakie środki transportu i metody transportu. Praktyczność ton worków, aby w pełni uwzględnić specyficzne sposoby i metody wykorzystania ton worków przez klientów, Shandong ton worków, takie jak podnoszenie, transport, wydajność materiału załadunkowego. Tony worków z uszczelnieniem, konsumenci ton worków o wydajności zgrzewania wymagania są różne, dlatego powinniśmy w pełni je wziąć pod uwagę. Takie jak proszek lub substancje toksyczne, bojące się zanieczyszczonych przedmiotów w zakresie wymagań dotyczących uszczelnienia są bardzo rygorystyczne, materiały podatne na wilgoć lub pleśń dotyczące szczelności mają również specjalne wymagania.

Worki tonowe stosowane są głównie w produktach luzem, granulowanych lub sypkich, a gęstość fizyczna i stopień rozluźnienia zawartości powodują różne efekty.

Wykonanie worka tonowego powinno odbywać się jak najbliżej klienta, aby załadować produkt w celu wykonania testu, czyli normy zapisanej w „Testowaniu specjalnego standardowego wypełniacza”, w miarę możliwości, aby standardy techniczne odpowiadały wyzwaniom gospodarki rynkowej.

Jaką rolę może UV-resistant Jumbo Bags grać?

1, ograniczenia producentów toreb kontenerowych dotyczące pakowania są bardzo duże. Produkty w proszku i granulki mogą być pakowane w worki kontenerowe.

2, popraw moc załadunku i rozładunku. Ma dużą pojemność, załadunek i rozładunek jest bardzo szybki, ponad dziesięciokrotnie wydajniejszy niż konwencjonalna linia do pakowania toreb papierowych.

3, może skutecznie konserwować produkt. Dane worka kontenerowego są odporne na deszcz i nieprzepuszczalne, a po napełnieniu na zewnątrz mogą być również odporne na wilgoć.

4, zajmują mniej miejsca. Puste torby można złożyć, mały rozmiar, okrągłe tony ton toreb, pełna pojemność worka.

5, długie życie, UV-resistant Jumbo Bags tony toreb, mogą być używane wielokrotnie. Worki tonowe są wykonane z danych o wysokiej wytrzymałości, trwałe i mogą być akceptowane i ponownie wykorzystywane.

Tagged

Strona główna przy zakupie towarów będzie miała specjalną torbę na zakupy, a towary zostaną zapakowane w specjalną torbę, a następnie sypki materiał granulowany w proszku musi użyć jakiego rodzaju torby do pakowania? Tym razem nie sposób nie wspomnieć o torbie typu jumbo. jumbo bag należy do elastycznego pojemnika do pakowania transportowego, można go używać jako opakowania na proszek, materiały sypkie i granulowane. Opakowanie jest idealne! Używanie worka jumbo do pakowania tych materiałów może skutecznie poprawić efektywność załadunku i rozładunku, ale także może obniżyć koszty transportu, co jest głównym powodem, dla którego wiele przedsiębiorstw wybiera torbę jumbo! Jakie więc aspekty należy wziąć pod uwagę podczas projektowania? jumbo bag factory powiedzieć wszystkim!

Elementy do rozważenia przy projektowaniu torby jumbo:

1. Wytrzymałość: czynniki, które należy wziąć pod uwagę przy projektowaniu, objętość opakowania, wagę zawartości i jednostkę opakowania (liczbę opakowań), należy również wziąć pod uwagę odległość transportu i liczbę transportów, a także środek transportu i sposób transportu. Materiał: rozsądny dobór materiałów powinien opierać się na warunkach użytkownika i rozsądnym współczynniku przetwarzania. Na przykład zdolność tworzyw sztucznych do zapobiegania starzeniu się na słońcu jest głównym wskaźnikiem jakości pojemnika. W procesie produkcyjnym należy zwrócić uwagę na stosowanie środków anty-UV i dobór materiałów anty-UV.

2. Uszczelnianie: różne materiały opakowaniowe, różne wymagania dotyczące uszczelnienia, takie jak proszek lub materiały toksyczne, obawa przed zanieczyszczonymi przedmiotami, wymagania dotyczące uszczelnienia są bardzo rygorystyczne. Projektując torby pojemnikowe należy zwrócić uwagę na wpływ procesu powlekania folią bazową i procesu szycia na właściwości uszczelniające.

3. Dostępność: przy projektowaniu worka kontenerowego należy w pełni uwzględnić podnoszenie i transport worka kontenerowego oraz właściwości załadowanego materiału.

4. Użyteczność: należy również rozważyć, czy opakowana żywność jest żywnością i upewnić się, że nie ma niekorzystnego wpływu na opakowaną żywność.

Oto cztery elementy, które należy wziąć pod uwagę podczas projektowania jumbo bag.W przypadku torby typu jumbo należy jedynie chwycić cztery elementy, aby ją zaprojektować, aby zapewnić jej jakość i wydajność, aby projekt torby typu jumbo był lepiej dostosowany do przedsiębiorstwa, ale także aby chronić efekt materiałów załadowanych workiem typu jumbo!

Tagged

Fibc bags is a kind of bag used for transportation, this kind of product is also known as container bags. It has a certain softness, but the material is strong, is a good helper to transport materials.Mainly used in some materials for the fine powder, particles and other systems of the industry.These material activities are large, transport is able to use it to stop in full bloom, not easy to show leakage.
fibc bags operate bento boxes when loading materials, it is very light weight itself, can complete the automation state, so as not only to save manpower, but also to speed up the progress of work.Loading and unloading time can use the forklift to stop batch loading and unloading, a large amount of handling, fast and effective.Large capacity, more varieties, strong material can stop stacking, can be frugal space, but pay attention to the stacking to be stacked neat, to prevent the placement is not in place of the onset of dumping.

fibc bags are a product that can be applied repeatedly and is easy to carry.Can play a good role in rain and water, can ensure the quality of internal materials, their use of life is also comparable to long so very popular. fibc bags in the operation of the need to pay attention to: if lifting a bag, hanging from the air when the personnel can not stand below, because the product is a bag, there is a certain use of life.

If it falls under gravity, it’s very risky.When lifting should hang adhere to the equilibrium state.Do not hang it on one side or diagonally.During the lifting process, do not let other items come into contact with it to avoid scratching the hook or bag.If you use a forklift to transport the bag, do not directly fork like the bag to avoid damage. fibc bags how to carry it?Usually, the tray should be used to stop.Do not use the fork to hold the upper part of the bag swing stop handling work, it is easy to damage.In addition, whether in a stationary state or moving state should adhere to the upright posture.

Tagged

Of course, the printing quality of the container tons of bags depends on the following elements, personnel issues: personnel issues mainly reflect the employee’s sense of obligation and technical proficiency level. Equipment technology: container tons of bag equipment consumption aging, drying, and bag feeding technology will lead to the container bag consumption process presents a variety of adhesions and other issues. The raw material is good or bad: including ink quality, mixing average, bag quality, or offset printing problems, and other raw material problems will lead to printing problems.

Jumbo bag manufacturers in the consumption of jumbo bag are very careful, they will use the data processing, which will use the spinning process consumption FIBC, but spinning process compared to the trouble, always present in the consumption or more or fewer problems, but the phenomenon of bamboo during surgery, what is the reason? The cooling water temperature is high. The crystallinity of the polypropylene film is too large.

Stretching temperature is low. Oven temperature is low, or uneven temperature spread, which leads to spinning is stretched at inappropriate temperatures. The extrusion temperature is low. The extrusion temperature is low, the film is not plasticized. The stretch ratio is low. The stretch ratio is low, the blank is not stretched enough. Bag manufacturers in the packaging process of consumption in the process of consumption of bamboo yarn have a great impact on the quality of the bag, so the net bag manufacturers will spend a lot of human and material resources. About this.

jumbo bag is a new type of packaging container. Admittedly not presented for a long time, but it carried out quickly. The use of container bags can speed up loading and unloading efficiency. Its large capacity, loading, and unloading speed. Paper bag packaging a lot; transport is also very bento, the jumbo bag has a special ring, bento lifting equipment used. the jumbo bag takes up very good space. After folding can store empty bags, but after the expansion of the empty bag capacity; container bags use long life, can be used repeatedly.

Tagged

Of course, the printing quality of the container tons of bags depends on the following elements, personnel issues: personnel issues mainly reflect the employee’s sense of obligation and technical proficiency level. Equipment technology: container tons of bag equipment consumption aging, drying, and bag feeding technology will lead to the container bag consumption process presents a variety of adhesions and other issues. The raw material is good or bad: including ink quality, mixing average, bag quality, or offset printing problems, and other raw material problems will lead to printing problems.

Jumbo bag manufacturers in the consumption of jumbo bag are very careful, they will use the data processing, which will use the spinning process consumption FIBC, but spinning process compared to the trouble, always present in the consumption or more or fewer problems, but the phenomenon of bamboo during surgery, what is the reason? The cooling water temperature is high. The crystallinity of the polypropylene film is too large.

Stretching temperature is low. Oven temperature is low, or uneven temperature spread, which leads to spinning is stretched at inappropriate temperatures. The extrusion temperature is low. The extrusion temperature is low, the film is not plasticized. The stretch ratio is low. The stretch ratio is low, the blank is not stretched enough. Bag manufacturers in the packaging process of consumption in the process of consumption of bamboo yarn have a great impact on the quality of the bag, so the net bag manufacturers will spend a lot of human and material resources. About this.

jumbo bag is a new type of packaging container. Admittedly not presented for a long time, but it carried out quickly. The use of container bags can speed up loading and unloading efficiency. Its large capacity, loading, and unloading speed. Paper bag packaging a lot; transport is also very bento, the jumbo bag has a special ring, bento lifting equipment used. the jumbo bag takes up very good space. After folding can store empty bags, but after the expansion of the empty bag capacity; container bags use long life, can be used repeatedly.

 

Operator:Abner.Li

Tagged

In different seasons, when using the FIBC bag, you need to pay attention to different matters. So what are the details you must pay attention to when using the FIBC bag?

When the FIBC bag is not used, fold it up as much as possible, reduce moisture and sunlight exposure, and shorten the service life of FIBC bag due to the impact of the external environment. But also pay attention to rain and snow, low freezing temperature, cold weather, will greatly reduce the application effect of the product.

There is also the problem of the secondary application. Before the secondary application is stopped, all the original loaded items should be emptied to prevent the loss caused by the mixing of items. There are also problems with its application environment to reduce its impact on the FIBC bag. The vast majority of FIBC bag‘s consumers have the ability to resist the corrosion of acid, alkali, and other chemicals. Therefore, when using and storing, the request is not too high, and it can also bring a lot of conveniences.

Because of its excellent electrical insulation, its external resistance and volume resistance are very large, the breakdown voltage is large, and the dielectric loss angle tangent value is small. Introduction to FIBC bag’s usual method of self-care:

In the process of using the FIBC bag, we are sure to encounter some problems with how to pack. Today, the manufacturers of ton bags simply introduce the method of FIBC bag’s self-care.

Under the condition of direct sunlight, the strength of the FIBC bag will be reduced to 25 in one week and 40 in two weeks, which can’t be used at all. Therefore, the FIBC bag should be stored in a cool and clean room. During transportation, it should be kept away from the sun and rain. It should not be close to the heat source. The storage period should not exceed 18 months.

In practice, it is possible for FIBC Bag to age in 18 months, so the effective period of FIBC Bag should be shortened and 12 months should be the appropriate period.

Research methods, pay attention to efficiency so that the ability does not delay the normal use of container bags, saving consumption costs.

Tagged

The application environment of the FIBC bag is often exposed to light in the outdoor, and the light amount in each region is different, which may lead to the local foreign businessmen mistaking the UV protection of the container bag for not reaching the request. It is suggested that container bag manufacturers should increase the dosage of anti violet masterbatch properly according to the difference of illumination in different regions, so as to improve the production quality and prolong the service life.

The main processing raw materials and auxiliary materials of FIBC bag factory are generally as follows: under the condition that the price of container bags is almost the same as the labor cost, it depends on whether the materials can be brand-new aggregates, whether the excessive recycled materials can be added, whether the modifier (calcium carbonate masterbatch) can be added, and the aging resistance of PP woven fabric with the modifier will drop seriously.

The price of color masterbatch is also very different. Some pigments can play an anti-aging role in the container bag and have a great impact on the service life of the container bag. Whether the rutile titanium dioxide masterbatch with external coating can be used, whether the yellow pigment with good weather resistance can be used, whether the blue pigment used contains free copper, etc. will have a great impact on the service life of the container bag.

The form and dosage of anti violet can play a great role in the aging of containerized bags. Powdered UV will sink due to the difference in specific gravity and size and PP particles, and it is difficult to disperse evenly into PP pellets. This will lead to some very good flatweaves, some of which are very poor, which will affect the aging resistance of the entire woven fabric. However, the size and specific gravity of UV resistant masterbatch similar to PP will not have such problems.

Tagged

The price of container bags sometimes varies according to the price of materials.

For example, many enterprises use non-woven fabrics to sew container bags. What are the advantages of making jumbo bags from non-woven fabrics? Non-woven fabric (polyester non-woven fabric, non-woven fabric) is also known as geotextile, which is a kind of permeable geosynthetic material and is formed by needling or weaving synthetic fibers. Burning wool non-woven fabric has excellent filtration, isolation, enhanced protection, high tensile strength, good permeability, high-temperature resistance, antifreeze, aging resistance, and corrosion resistance.

  1. Pavement method of non-woven fabrics:

Cold rolling with manual service; Nylon cloth should be leveled and maintain a moderate deformation capacity.

The installation of polyester filament or polyester staple non-woven fabric is generally based on overlapping, sewing and electric welding of steel bars. The total width of sewing and electric welding is generally 0.1μm or more, and the total overlapping width is generally 0.2M or more. Non-woven fabrics that will be exposed for a long time shall be welded or sewn by electric welding.

2, non-woven fabric pavement processing technology:

Storage, transportation, and solution of non-woven fabrics

Burnt nonwoven rolls should be maintained from damage before installation. Non-woven fabric rolls should be piled up in areas without water. The height-to-width ratio of the stacks should not exceed four rolls, and the resolution of wire rope rolls can be seen. Non-woven fabric rolls must be covered with opaque raw materials to avoid UV embrittlement. In the storage process, the consistency of identification and data information should be maintained.

During the whole transportation process, the non-woven fabric roll must be protected from damage (including on-site transportation from raw materials storage to work).

Be sure to repair the non-woven fabric roll damaged by physics. Non-woven fabrics that are seriously damaged cannot be used. All non-woven fabrics that come into contact with leaked chemicals are not allowed to be used in this new project.

  1. Non-woven fabric splicing

All splices must be carried out continuously (for example, point splicing is not allowed). Before overlapping, spunlaced nonwoven must overlap less than 150 mm. Smaller needle gauge selvages (exposed edges of raw materials) shall be at least 25 mm.

The self-hand woven non-woven fabric connector comprises a 1-thread and a thread chain sewing mode. The thread used for sewing should have a strength of over 60N and be equivalent

Composite resin with acid resistance and ultraviolet resistance on or above nonwoven fabric.

Tagged

In order to better serve and guide customers, we send on-site pavement service personnel to Wyściółka sucha using the end of the Carbon Black Factory, conduct
Dry bulk liner of white Carbon Black (SiO2) products for bulk transport packaging of loading and unloading cargo guidance services, and track the record of our patented product PE film container bags/bulk bags in low density, very light powder products in the field of use.

Combined with the current loading and unloading requirements of carbon black and the customer’s terminal, we have carried out practical professional design to meet the customer’s use
Requirements.In the process of unloading, we also give key guidance, such as container elevation operation, flow control, airflow system use.
The successful completion of the customer in the Carbon Black Wyściółka sucha products to achieve a non-polluting silo to silo closed transport storage mode.

We can provide customers with a complete package of logistics and transportation solutions! Large bulk packaging service for the world!

Tagged

The key reason for the broken edge of bulk bag sling is that the quality of sling is very poor. If it can’t stand too long-term application, it will break or break the edge, resulting in the problem that the overall container bag can’t be used.

Generally speaking, there are three reasons for the broken edge of sling:
A. excessive and frequent application and continuous lifting damage make the sling exceed the service life, and the similar container bags have already exceeded the service life or frequency, so new ones should be purchased.

B. the most important factor for the sling to rot is the poor quality of the sling made by the manufacturer. It can only be used once or twice. The bulk bag sling is rotten, but the overall body is not damaged. If it has the ability to repair, it can be removed and replaced.

C. another key element is that if incorrect materials are used to make a sling, it is the key problem that causes the broken edge of the bulk bag. If too much polypropylene is used and too little high-pressure polyethylene is used, it will cause the weathering layer. Because the container bag is often used outdoors, the broken edge is inevitable. If such a situation occurs, replace the manufacturer as soon as possible.

Tagged

The use of FIBC in our life is very common. We use plastic container bags according to the production of different materials，
It can be divided into two kinds. One is PE material, the other is PP material. To know these two materials have good low-temperature resistance and good chemical stability.
After that made of plastic containers, which of these two materials better performance?

The container bag made of PE is easy to aging and requires careful maintenance; PP is a semi-crystalline material; it is harder than PE and has a higher melting point. When the homopolymer type of PP temperature is higher than 0℃, the plastic container bag is very brittle. Thus, many commercial PP material is a random copolymer having 1-4% ethylene or higher ethylene content ratio.Copolymer.PP type polymer type has low heat distortion temperature, low transparency, low gloss, and low rigidity, but has a stronger impact strength. With the increase of ethylene content, the strength of PP increases. Bulk bags made of PP material are more expensive.

Tagged

In everyday life how do we control the printing of space bags, also called Container bag, ton bag?
The colors of ton bags should match real, natural and colorful. The index should include two aspects; one is the field density tolerance of different sheets of the same product, Cyan (C) magenta (M) less than or equal to 0.15 black (BK) less than 0.20, yellow (Y) less than 0.10 ;
Appearance is the first thing, the layout must be clean, no obvious dirt; secondly, the color should be basically the same; that is the text, it should be complete, clear, accurate; and finally the size requirements. Fine product size tolerance is less than 0.5 mm, the general product size tolerance is less than 1.0 mm.
Of course, the printing quality of the Container bag depends on the following factors
First, personnel issues: personnel issues mainly reflect the sense of responsibility and technical proficiency of employees.
Second, the equipment process: the production of tons of container bags equipment aging, drying and send the bag technology will lead to a variety of problems such as adhesion container bag production process.
Third, the quality of raw materials: including ink quality, mixing uniformity, bag quality or offset printing problems and other raw material issues will lead to printing problems.


Of course, the printing quality of the Container bag depends on the following factors
First, personnel issues: personnel issues mainly reflect the sense of responsibility and technical proficiency of employees.
Second, the equipment process: the production of tons of container bags equipment aging, drying and send the bag technology will lead to a variety of problems such as adhesion container bag production process.
Third, the quality of raw materials: including ink quality, mixing uniformity, bag quality or offset printing problems and other raw material issues will lead to printing problems.

Tagged

O nas

Hebei Wanhefeng Package Co., Ltd. jest profesjonalnym producentem różnych toreb kontenerowych, tkanin PP, tkanin PE, pasów do podnoszenia, pasów osłonowych i linek blokujących itp. Znajdujemy się w pobliżu kolei Xibaipo, transport jest wygodny i szybki. Jesteśmy zupełnie nowym prywatnym przedsiębiorstwem o kapitale zakładowym 3 miliony RMB. Jest to firma, która koncentruje się na badaniach i rozwoju, produkcji i sprzedaży plastikowych produktów do pakowania, w tym zwykłych toreb pojemnikowych, przewodzących FIBC, FIBC na leki, toreb kontenerowych do kontaktu z żywnością, torebek niebezpiecznych, toreb na endometrium, torebek na chusty, tkanych torba, wewnętrzna część toreb kontenerowych i tak dalej. Nasza firma zajmuje powierzchnię 10 tysięcy metrów kwadratowych i zatrudnia ponad 300 pracowników, w tym 20 naukowców. FIBC może obejmować obrót magazynem, dostępność do odzyskania, ponowne wykorzystanie, dużą nośność, niewielką wagę, łatwy mechaniczny załadunek i rozładunek oraz ułatwienie logistyki i transportu.

PRODUKTY

Poproś o wycenę

Skontaktuj się z nami

  • Hebei Wanhefeng Package Co., Ltd.
    • +86 155 4456 6565wanhefeng@whfpackage.com
  • Strefa przemysłowa Hexi, miasto Weizhou, hrabstwo Jingxing Shijiazhuang, Hebei, Chiny 050300.
    • Strefa przemysłowa Hexi, miasto Weizhou, hrabstwo Jingxing Shijiazhuang, Hebei, Chiny 050300.+86 15544566565+86 0311-82359166
    wanhefeng@whfpackage.comnancy@whfpackage.com

    Prawa autorskie © 2026 Hebei Wanhefeng Package Co., Ltd. Wszelkie prawa zastrzeżone.  privacy policy

    Skontaktuj się z nami
    WhatsApp

    Zapytanie ofertowe