Ton bag – Hebei Wanhefeng Package Co.,Ltd.

Fabricantes de sacolas Jumbo no processo de fabricação de jumbo bag, existem muitos processos, durante os quais um processo é o processo de trefilação, a largura do fio e a leve tensão determinam diretamente a qualidade da sacola jumbo, toneladas de fabricantes de sacolas para levá-lo a entender o processo de trefilação da sacola jumbo.

Ao desenhar, quando extrusão de filme plástico, a necessidade de prestar atenção a alguns assuntos. Após o resfriamento do filme fundido extrudado, de acordo com os diferentes tipos de fio plano para selecionar a distância apropriada da faca para cortar. testes de corte e trefilação dessas colunas, podemos caracterizar a qualidade jumbo bag toneladas de sacos. Portanto, o processo de trefilação de arame plano de sacos jumbo ainda é muito difícil de não medir, e é por isso que muitos de nós não queremos explorá-lo.

Sobre o saco jumbo, esta alta qualidade e alta frequência de uso de produtos de embalagem, um pequeno problema é inevitável, e esses problemas interrompem a linha é uma questão muito importante enquanto isso, e como lidar com isso se tornou nossa principal prioridade Oh. A desconexão é que os fabricantes de sacos jumbo costuram problemas frequentemente encontrados, a qualidade da sutura não é necessária, a máquina não está ajustada corretamente, as peças ao longo da linha têm uma boca afiada, o método de operação é problemático, o resfriamento da agulha não é suficiente, etc., levará à desconexão. Os fabricantes de sacolas jumbo não podem aparecer como um fenômeno de curto prazo. Fabricantes de sacolas ton

Ao usar a máquina de costura de saco jumbo com ponto travado, costurando espessura irregular do produto, encontrou falha de desconexão, além de considerar a análise dos motivos acima, um por um, também deve prestar atenção aos dois fios de gancho causados pela desconexão. jumbo bag eixo da máquina de costura e relação de transmissão da lançadeira rotativa de 1: 2. Ou seja, a rotação do eixo superior por uma semana, o eixo rotativo para girar por duas semanas.

UV-resistant Jumbo Bags , isto é, sacos contêineres resistentes a UV, usados para armazenamento de produtos químicos e embalagens de transporte, os sacos contêineres são um dos usos dos sacos contêineres químicos. É projetado pelas características das próprias matérias-primas químicas, materiais de embalagem, além de transporte e outros requisitos, geralmente também para garantir a integridade de seus itens de embalagem, segurança, bem como em linha com as disposições dos materiais de embalagem nacionais correspondentes. Toneladas de sacos, também conhecidos como sacos de contêineres flexíveis, toneladas de sacos, sacos espaciais, etc., toneladas de sacos personalizados, toneladas de sacos de contêineres, tradução para o inglês de uma variedade, FIBC, é um tipo de aparelho de unidade de contêiner.

Toneladas de fabricantes de sacolas na produção precisam estar atentos a muitos assuntos, antes de mais nada considerar o ponto de vista do consumidor, a seguir apresentaremos em detalhes.

A segurança de toneladas de sacos é a primeira coisa a considerar. No projeto, considere o volume da embalagem, o peso da carga e o número de unidades de embalagem, mas também considere a distância do transporte e quantas vezes de manuseio, quais meios de transporte e métodos de transporte. deve levar totalmente em consideração.Tais como pó ou substâncias tóxicas, com medo de itens contaminados nos requisitos de desempenho de vedação são muito rigorosos, materiais propensos a umidade ou mofo na estanqueidade ao ar também têm requisitos especiais.

Os sacos de tonelada são utilizados principalmente em itens a granel, granulados ou em pó, a densidade física e o grau de afrouxamento do conteúdo do uso de diferentes efeitos.

O desempenho do saco de tonelada deve ser o mais próximo possível do cliente para carregar o produto para fazer o teste, que é o padrão escrito no “Teste de enchimento padrão especial”, na medida do possível para cumprir os padrões técnicos para atender aos desafios da economia de mercado.

Que papel pode UV-resistant Jumbo Bags jogar?

1, as restrições de embalagem dos fabricantes de sacos contêineres são muito grandes. Produtos em pó e granulados podem ser embalados em sacos contêineres.

2, melhora a potência de carga e descarga. Possui grande capacidade, carga e descarga são muito rápidas, mais de dez vezes mais eficientes do que a linha de embalagem de saco de papel convencional.

3, pode efetivamente manter o produto. Os dados do saco de contêiner são à prova de chuva, função impermeável, depois de preencher o exterior também pode ser à prova de umidade.

4, ocupam menos espaço. Os sacos vazios podem ser dobrados, tamanho pequeno, toneladas redondas de sacos, toneladas de sacos, capacidade total do saco.

5, longa vida, UV-resistant Jumbo Bags toneladas de sacos, podem ser usadas repetidamente. Sacos de toneladas são feitos de dados de alta resistência, duráveis e podem ser aceitos e reutilizados.

Tagged bags bulk container container bag container bags FIBC jumbo bag one packaging Ton bag tons of bags UV-resistant bulk bags UV-resistant Jumbo Bags

Ton bag is mainly loaded with bulk,granular or powdered items, the physical density of the contents and the degree of lax effect on the overall results are clearly different.

On the basis of ton bag function determination,as far as possible to use close to the customer to load the goods to do the experiment, this is the standard written in the“experimental common standard filler”, as far as possible to make technical standards to meet the market economy.

In general, after lifting the experiment ton bag is not the effect.If in the port, railway, truck lifting, the bag really fell up, just two cases:first, the operation is wrong,the second is the class ton bag failed to mention hanging experiment.

Where you can reach more than 5 times the safety factor of ton bag, four rings in two or two rings in a must have a rated load of more than twice and a half of the tension function, even if the two sling off, ton bag all will not result.

Tagged 1 ton bags 1 ton bulk bags for sale bags bulk sling Ton bag

Ton bags, also known as the jumbo bag, is a preferred method of carrying powder goods in long-distance transportation. Static electricity will occur in storage. How to prevent the harm caused by the static electricity?

In the process of storage, appropriate measures should be taken to make the static electricity disappear as soon as possible. We can set up a ground wire in the warehouse, and often spray water on the warehouse to keep a certain humidity or place a conductive floor under the FIBC bag goods.

Try to reduce the shaking in the ton bag, reduce the conflict, and change the handling method.

Tagged bags bulk container FIBC FIBC Bag jumbo bag jumbo bags Ton bag

The solution to Wear of Ton Bags during Packing

In many cases, containers wear under the condition of effective saturation when loading Ton Bags. below we will provide a corresponding solution strategy.

First, the solution of a forklift truck for container loading.

A. How many tons Ton Bags can be loaded when measuring the height of containers?

B. If only two heights can be installed, when installing the second height, find two forklift trucks to cooperate, one forklift truck will pick up Ton Bags and place them on the blade of the 12th forklift truck, and then the second forklift truck will level the ton bags on the bottom ton bags.

Second, use container handling equipment

The container handling equipment can be operated according to the operating instructions of the container handling equipment, which will not be described in detail here.

Tagged bags container one Ton bag ton bags

1, Ton bag raw materials to semi-finished products, semi-finished products if you need to calculate the cost, then you need to be semi-finished products as the first stage of the production cost of production with the production cost of the collection occurred subjects, then the number of semi-finished finished and finished standard distribution, calculate ton bag semi-finished costs.

2, Semi-finished products to the finished product, in fact, is the same as the first step, but this step is the raw material semi-finished products, semi-finished products will be processed into a ton bag. Production costs, and then finished in the finished product by the number and standard (or said distribution rate)distribution, calculate the cost of finished products.

3, After the completion of the second step, the cost of the amount in the inventory ton bag in the finished product variety detailed accounting, at the time of sale, to confirm revenue, carry-forward sales costs, according to the inventory of goods corresponding to the issue of sales of finished products to calculate the cost of the amount of the main business

Tagged 1 ton bags 1-bags Ton bag ton bags for sale

Different packaging materials, different requirements.

Such as powder or articles, afraid of contaminated items on the sealing performance requirements are very strict, easy to damp or mildew materials for airtightness also have special requirements. So in the design of ton bag, pay attention to consider the fabric coating process and the effect of the sewing process on the dust.

Tons of bags to facilitate the shipment of bulk powder materials, with a large volume, lightweight and other characteristics, the following jumbo bag factory to introduce the ton bag dust removal process knowledge：

Removal of export tons of bags with cloth surface dust methods are:

1, tons of cloth before importing Composite roll from the delivery frame, or plus Corona impact cloth, decontamination and to oil; or the installation of a wide brush, sweep away dust cloth; or the use of rubber-coated special cleaning roller.

2, Cleaning roller close to the cloth surface, the cloth surface can be transferred to the precipitated powder at both ends of the cloth edge rotation. Thereby reducing the dust due to excessive cloth flour, resulting in the impact of the coating peel strength.

In fact, in practice, the diaphragm gap distance and offset between the two must be combined with other process parameters and flexible applications.

Because for different jumbo bag substrate, the degree of heat absorption, and the ability to resist burns are different.

We can be based on different substrates coated, adjusted from different air gap distance and Offset in different diaphragms, looking for good results.

Tagged bags bulk jumbo bag jumbo bag factory packaging Ton bag tons of bags

As the international market demand for ton bag increased, ton bag exports increased further. At the same time, ton bag quality requirements on the international market become more stringent. Therefore, how to improve the strength of the ton bag products, select the appropriate raw materials, reasonable ton bag proportion; how to design a high-quality ton bag under the premise of the implementation of national standards, is an important issue in the production enterprises placed in ton bag. This article describes a few of the issues that should be noted in the design of a ton bag.

　　 the ton bag is made of polyolefin resin through a wire drawing process, coated and cut into cylindrical or flaky substrates of different sizes, and then sewn into a circle or square shape according to design requirements. Products. ton bag is a soft shipping packaging container with advantages of lightweight, softness, acid and alkali resistance, moisture resistance and no water leakage. It has sufficient structural strength, is solid and safe, can be packed and unloaded. It is convenient and adaptable to the characteristics of the mechanized operation. It can be widely used in the packaging of various powdery, granular and blocky items such as chemical, cement, grain and mineral products.

　　 the basis and principle of ton bag design? Tonnage bags must be designed to be used strictly as export packaging to ensure the effective protection of exported goods during handling, transportation, and storage, and to safely and reliably transport the goods to their destination. Therefore, the design of the ton bag must meet the four main aspects, namely safety, storage, availability, and tightness.

　　Safety mainly refers to the strength of a ton bag. Packaging volume, load weight and packaging unit number (PCs) should be considered in the design. Consideration should also be given to the distance and frequency of transport and to which mode of transport should be used. ton bag, the strict requirements of ton bag bottom cloth and Sling technology. From a safety point of view, it is clear ton bag structure is all bottom Sling structure.

Tagged 1-1-ton tote bags bags container one ton bags packaging Ton bag

In everyday life how do we control the printing of space bags, also called Container bag, ton bag?
The colors of ton bags should match real, natural and colorful. The index should include two aspects; one is the field density tolerance of different sheets of the same product, Cyan (C) magenta (M) less than or equal to 0.15 black (BK) less than 0.20, yellow (Y) less than 0.10 ;
Appearance is the first thing, the layout must be clean, no obvious dirt; secondly, the color should be basically the same; that is the text, it should be complete, clear, accurate; and finally the size requirements. Fine product size tolerance is less than 0.5 mm, the general product size tolerance is less than 1.0 mm.
Of course, the printing quality of the Container bag depends on the following factors
First, personnel issues: personnel issues mainly reflect the sense of responsibility and technical proficiency of employees.
Second, the equipment process: the production of tons of container bags equipment aging, drying and send the bag technology will lead to a variety of problems such as adhesion container bag production process.
Third, the quality of raw materials: including ink quality, mixing uniformity, bag quality or offset printing problems and other raw material issues will lead to printing problems.

Of course, the printing quality of the Container bag depends on the following factors
First, personnel issues: personnel issues mainly reflect the sense of responsibility and technical proficiency of employees.
Second, the equipment process: the production of tons of container bags equipment aging, drying and send the bag technology will lead to a variety of problems such as adhesion container bag production process.
Third, the quality of raw materials: including ink quality, mixing uniformity, bag quality or offset printing problems and other raw material issues will lead to printing problems.

Tagged bags common container bag container container bag container bags one Ton bag ton bags

Container bag is also known as ton bag, is a bulk material bags, has an important role in transportation. Due to the special production process Container bag, when carrying the weight of the material has a clear requirement, so when containing materials should be selected corresponding Container bag.

In the transport of goods, the enterprise for Container bag load requirements is constantly improving, from 1 ton to 1.5 tons, from 1.5 tons to 2 tons……This Container bag design, production technology put forward higher requirements. Sometimes maybe just a small detail will bring great changes and improvements. As in the Container bag sewing process, the sides of the double-positive and negative superimposed sewing, so you can effectively prevent the Container bag suture problems.

Container bag sewing related to product quality and safe use has a very important role, and therefore should be noted. Stay tuned for more information.

Tagged bags bulk container bag Ton bag

There are many types of ton bag, in the use of nature will have some distinction; whether it is on the material or unloading, will be distinguished. Today we take a look at the method of Sacos FIBC discharge.

The unload method is based on the type of Sacos FIBC you are using，
One is the following with a funnel, which only needs to untie the original tying rope when lifting material can leak out of the material in the unloading, this ton bag can also continue to secondary circulation recycling or sale of second-hand ton bag.

The other is a fixed end, most of the first to remove the material cut open, so give secondary recycling inconvenience.

Different Sacos FIBC have different discharge mode, so when you use must distinguish the type.

Tagged 1-bags FIBC FIBC Bags Ton bag ton bags

Ton bag, also known as Sacos FIBC, is a kind of plastic woven bags, because of its capacity can hold a large contrast, and named for the tonne bag, is nowadays one of our powdered goods and goods may long-distance transport of goods and merchandise comparison favorite packaging method, then about this kind of goods in the storage of the electrostatic hazards in the packaging, perhaps in the storage of goods, some static electricity about him.

First of all, to use anti-static Sacos FIBC

Secondly, we want to control the packaging of static electricity does not occur, similar to the transfer of flammable and explosive materials, as far as possible to cut in the Sacos FIBC and between the shaking, cut the conflict, can also be changed from the following loading method.

Again, in the storage process, to adopt appropriate measures to make static electricity has occurred quickly disappear, we can set up a ground line in the warehouse, the warehouse is often carried out sprinkler moisture must humidity, perhaps in the goods placed below the conductive floor.

Tagged 1-bags FIBC FIBC Bags is a kind of plastic woven bags one packaging Ton bag woven bags

wanhefeng@whfpackage.com

wanhefeng@whfpackage.com

+86 155 4456 6565

First, the solution of a forklift truck for container loading.

Second, use container handling equipment

Different packaging materials, different requirements.

Removal of export tons of bags with cloth surface dust methods are:

1, tons of cloth before importing Composite roll from the delivery frame, or plus Corona impact cloth, decontamination and to oil; or the installation of a wide brush, sweep away dust cloth; or the use of rubber-coated special cleaning roller.

2, Cleaning roller close to the cloth surface, the cloth surface can be transferred to the precipitated powder at both ends of the cloth edge rotation. Thereby reducing the dust due to excessive cloth flour, resulting in the impact of the coating peel strength.

Sobre nós

PRODUTOS

Solicite um orçamento

Contate-nos

wanhefeng@whfpackage.com

wanhefeng@whfpackage.com

+86 155 4456 6565

First, the solution of a forklift truck for container loading.

Second, use container handling equipment

Different packaging materials, different requirements.

Removal of export tons of bags with cloth surface dust methods are:

1, tons of cloth before importing Composite roll from the delivery frame, or plus Corona impact cloth, decontamination and to oil; or the installation of a wide brush, sweep away dust cloth; or the use of rubber-coated special cleaning roller.

2, Cleaning roller close to the cloth surface, the cloth surface can be transferred to the precipitated powder at both ends of the cloth edge rotation. Thereby reducing the dust due to excessive cloth flour, resulting in the impact of the coating peel strength.

Sobre nós

PRODUTOS

Solicite um orçamento

Contate-nos

Solicitar Consulta