Ton bag is mainly loaded with bulk,granular or powdered items, the physical density of the contents and the degree of lax effect on the overall results are clearly different.

On the basis of ton bag function determination,as far as possible to use close to the customer to load the goods to do the experiment, this is the standard written in the“experimental common standard filler”, as far as possible to make technical standards to meet the market economy.

In general, after lifting the experiment ton bag is not the effect.If in the port, railway, truck lifting, the bag really fell up, just two cases:first, the operation is wrong,the second is the class ton bag failed to mention hanging experiment.

Where you can reach more than 5 times the safety factor of ton bag, four rings in two or two rings in a must have a rated load of more than twice and a half of the tension function, even if the two sling off, ton bag all will not result.

Tagged

Bulk bags are used in many industries for the transport of products is very convenient. But in the use of time should also pay attention to it to do a good job of dust and moisture measures, so as to ensure the safety of Transportation Products.

In the transport is very vulnerable to the weather and the natural environment, always encounter dust and moist air, but many products need to do the work of dust and moisture. sacchi sfusi of the material itself is good moisture, dust, radiation resistance, strong security features, in the transport of goods can be easily handling and handling, improve work efficiency, is currently using more transport packaging. Of course, in addition, we should use anti-rain tarpaulin and other products to do a good job of protective measures, bulk bags storage environment and put the requirements should also have certain rules, so you can well avoid being affected.

Tagged

The key reason for the broken edge of bulk bag sling is that the quality of sling is very poor. If it can’t stand too long-term application, it will break or break the edge, resulting in the problem that the overall container bag can’t be used.

Generally speaking, there are three reasons for the broken edge of sling:
A. excessive and frequent application and continuous lifting damage make the sling exceed the service life, and the similar container bags have already exceeded the service life or frequency, so new ones should be purchased.

B. the most important factor for the sling to rot is the poor quality of the sling made by the manufacturer. It can only be used once or twice. The bulk bag sling is rotten, but the overall body is not damaged. If it has the ability to repair, it can be removed and replaced.

C. another key element is that if incorrect materials are used to make a sling, it is the key problem that causes the broken edge of the bulk bag. If too much polypropylene is used and too little high-pressure polyethylene is used, it will cause the weathering layer. Because the container bag is often used outdoors, the broken edge is inevitable. If such a situation occurs, replace the manufacturer as soon as possible.

Tagged

Bulk bags is a kind of heavy weight packaging. It is very convenient to use sacchi sfusi in the transportation of bulk materials. Due to the influence of bulk bags, the number of uses will be limited, especially Factors will cause the bulk bags to age. Let’s analyze the causes of the aging of sacchi sfusi.

1, ultraviolet light of the sun
2, photooxidation
3, artificial aging
4, natural aging

It can be known that the aging of bulk bags is caused by many factors, at the same time, is also affected by temperature. In addition, climate differences in different regions and different years will also increase the use time of bulk bags products. Therefore, the use of bulk bags should be more careful. If it is used for a short period of time, there is no problem with sun and rain. In consideration of long-term use, it is necessary to pay attention to the sunscreen and rainproof such as rain tarpaulin.
The above is the information about sacchi sfusi, please continue to follow us for more information.

Tagged

 

The development of chemical industry inevitably promotes the market expansion of 1-tonne bags. So far, the technological process is quite similar, but the main difference lies in one kind of attitude towards quality and the spirit of pursuing excellence. So how was 1-tonne bags made? What is it made of?

Below the author shares the production technology of 1-tonne bags!

1 tonne bags

 

1 tonne bags with polypropylene as the main raw material, by adding a small amount of the stability of the seasoning after mixing, the extruder melt extrusion plastic film, cut into silk, stretch, then through the heat setting made of high strength and low elongation PP, then through textile, drench membrane plastic woven cloth fabric, and the harness accessories of bags made after stitching.

Tagged

Chi siamo

Hebei Wanhefeng Pacchetto Co.,Ltd. è un produttore professionale di vari sacchetti per contenitori, tessuto in PP, tessuto in PE, cinghia di sollevamento, cinghia di copertura e linea di bloccaggio ecc. Siamo vicino alla ferrovia Xibaipo, trasporto comodo e veloce. Siamo un'impresa privata nuova di zecca, con capitale registrato di 3 milioni di RMB, è un'azienda che si concentra su ricerca e sviluppo, produzione, vendita di prodotti di imballaggio in plastica, tra cui comuni sacchetti per contenitori, FIBC conduttivo, FIBC per farmaci, sacchetti per contenitori per alimenti, sacchetti pericolosi, sacchetti per endometrio, sacchetti a tracolla, tessuti borsa, interno delle borse contenitore e così via. La nostra azienda copre un'area di 10mila metri quadrati e conta più di 300 lavoratori, tra cui 20 ricercatori. Il FIBC potrebbe essere il turnover del magazzino, la disponibilità recuperabile, l'utilizzo del riutilizzo, la forte capacità portante, il peso leggero, il carico e lo scarico facile da eseguire meccanicamente e facilitare la logistica e il trasporto.

PRODOTTI

Richiedi un preventivo

Contattaci

  • Hebei Wanhefeng Pacchetto Co.,Ltd.
    • +86 155 4456 6565wanhefeng@whfpackage.com
  • Zona industriale di Hexi, città di Weizhou, contea di Jingxing Shijiazhuang, Hebei, Cina 050300.
    • Zona industriale di Hexi, città di Weizhou, contea di Jingxing Shijiazhuang, Hebei, Cina 050300.+86 15544566565+86 0311-82359166
    wanhefeng@whfpackage.comnancy@whfpackage.com

    Copyright © 2026 Hebei Wanhefeng Package Co., Ltd. Tutti i diritti riservati.  privacy policy

    Contattaci
    whatsapp

    Richiedi indagine