Ton bag is mainly loaded with bulk,granular or powdered items, the physical density of the contents and the degree of lax effect on the overall results are clearly different.

On the basis of ton bag function determination,as far as possible to use close to the customer to load the goods to do the experiment, this is the standard written in the“experimental common standard filler”, as far as possible to make technical standards to meet the market economy.

In general, after lifting the experiment ton bag is not the effect.If in the port, railway, truck lifting, the bag really fell up, just two cases:first, the operation is wrong,the second is the class ton bag failed to mention hanging experiment.

Where you can reach more than 5 times the safety factor of ton bag, four rings in two or two rings in a must have a rated load of more than twice and a half of the tension function, even if the two sling off, ton bag all will not result.

Bulk bags are used in many industries for the transport of products is very convenient. But in the use of time should also pay attention to it to do a good job of dust and moisture measures, so as to ensure the safety of Transportation Products.

In the transport is very vulnerable to the weather and the natural environment, always encounter dust and moist air, but many products need to do the work of dust and moisture. bolsas a granel of the material itself is good moisture, dust, radiation resistance, strong security features, in the transport of goods can be easily handling and handling, improve work efficiency, is currently using more transport packaging. Of course, in addition, we should use anti-rain tarpaulin and other products to do a good job of protective measures, bulk bags storage environment and put the requirements should also have certain rules, so you can well avoid being affected.

The key reason for the broken edge of bulk bag sling is that the quality of sling is very poor. If it can’t stand too long-term application, it will break or break the edge, resulting in the problem that the overall container bag can’t be used.

Generally speaking, there are three reasons for the broken edge of sling:
A. excessive and frequent application and continuous lifting damage make the sling exceed the service life, and the similar container bags have already exceeded the service life or frequency, so new ones should be purchased.

B. the most important factor for the sling to rot is the poor quality of the sling made by the manufacturer. It can only be used once or twice. The bulk bag sling is rotten, but the overall body is not damaged. If it has the ability to repair, it can be removed and replaced.

C. another key element is that if incorrect materials are used to make a sling, it is the key problem that causes the broken edge of the bulk bag. If too much polypropylene is used and too little high-pressure polyethylene is used, it will cause the weathering layer. Because the container bag is often used outdoors, the broken edge is inevitable. If such a situation occurs, replace the manufacturer as soon as possible.

Bulk bags is a kind of heavy weight packaging. It is very convenient to use bolsas a granel in the transportation of bulk materials. Due to the influence of bulk bags, the number of uses will be limited, especially Factors will cause the bulk bags to age. Let’s analyze the causes of the aging of bolsas a granel.

1, ultraviolet light of the sun
2, photooxidation
3, artificial aging
4, natural aging

It can be known that the aging of bulk bags is caused by many factors, at the same time, is also affected by temperature. In addition, climate differences in different regions and different years will also increase the use time of bulk bags products. Therefore, the use of bulk bags should be more careful. If it is used for a short period of time, there is no problem with sun and rain. In consideration of long-term use, it is necessary to pay attention to the sunscreen and rainproof such as rain tarpaulin.
The above is the information about bolsas a granel, please continue to follow us for more information.

 

The development of chemical industry inevitably promotes the market expansion of 1-tonne bags. So far, the technological process is quite similar, but the main difference lies in one kind of attitude towards quality and the spirit of pursuing excellence. So how was 1-tonne bags made? What is it made of?

Below the author shares the production technology of 1-tonne bags!

1 tonne bags

 

1 tonne bags with polypropylene as the main raw material, by adding a small amount of the stability of the seasoning after mixing, the extruder melt extrusion plastic film, cut into silk, stretch, then through the heat setting made of high strength and low elongation PP, then through textile, drench membrane plastic woven cloth fabric, and the harness accessories of bags made after stitching.

Sobre nosotros

Paquete Co., Ltd de Hebei Wanhefeng. es un fabricante profesional de varias bolsas para contenedores, telas de PP, telas de PE, correas de elevación, correas de protección y líneas de bloqueo, etc. Estamos cerca del ferrocarril Xibaipo, transporte conveniente y rápido. Somos una empresa privada completamente nueva, con un capital registrado de RMB3 millones. Es una empresa que se centra en la investigación, el desarrollo, la producción y la venta de productos de embalaje de plástico, incluidas bolsas de contenedores comunes, FIBC conductoras, FIBC para medicamentos, bolsas de contenedores de calidad alimentaria, bolsas peligrosas, bolsas de endometrio, bolsas tipo bandolera, bolsas tejidas. Interior de bolsas contenedoras, etc. Nuestra empresa tiene una superficie de 10 mil metros cuadrados y más de 300 trabajadores, incluidos 20 investigadores. El FIBC podría ser rotación de almacén, disponibilidad recuperable, utilización de reutilización, gran capacidad de carga, peso ligero, fácil carga y descarga mecánica y facilitar la logística y el transporte.

Solicitar una cotización

Contáctenos

  • Paquete Co., Ltd de Hebei Wanhefeng.
  • +86 155 4456 6565wanhefeng@whfpackage.com
  • Zona industrial de Hexi, ciudad de Weizhou, condado de Jingxing Shijiazhuang, Hebei, China 050300.
  • Zona industrial de Hexi, ciudad de Weizhou, condado de Jingxing Shijiazhuang, Hebei, China 050300.+86 15544566565+86 0311-82359166

    Copyright © 2026 Hebei Wanhefeng Package Co., Ltd. Reservados todos los derechos.  privacy policy

    Contáctenos
    WhatsApp

    Solicitar consulta